User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Using a USB Memory Device
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting (FAQ)
- Appendix
- SIL OPEN FONT LICENSE
Connecting Directly (Access Point Mode)
524X-03R
1660-068
Even in an envir
onment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without dicult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 196)
Connecting Directly (Touch Panel Model)(P. 197)
Connecting Directly (Black and White LCD Model)(P. 198)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order.
Check the network settings of the machine.
● Set the IPv4 addr
ess.
Setting IPv4 Address(P. 43)
Preparing the mobile device
● Congur
e settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
● <Menu> <Preferences> <Network> <Direct Connection Settings> set
<Use Dir
ect Connection> to <On>.
Specifying the value for time until auto termination
● Y
ou can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Direct Connection Termination>/<Time Until Direct Connection Termination>(P. 312)
Connecting multiple mobile de
vices at the same time
● Congure the machine's SSID and network key arbitrarily.
<Access Point Mode Settings>(P. 312)
Linking with Mobile Devices
196