User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Using a USB Memory Device
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting (FAQ)
- Appendix
- SIL OPEN FONT LICENSE
Touch panel model
● Select <On> in <Auto Acquir
e>, and select <Select Protocol>
<DHCP>.
Black and white LCD model
● Select <Select Pr
otocol>
<DHCP>.
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
● Select <Off>. If you select <DHCP> when these services ar
e unavailable, the machine will waste time
and communications resources searching the network for these services.
3
Check that <Auto IP> is set to <On>.
● If <Off> is selected, change the setting to <On>.
4
Select <Apply>.
● IP addr
esses assigned via DHCP override the address obtained via Auto IP.
Manually entering an IP address
1
Congure a setting to disable auto-acquisition.
Touch panel model
● Select <Auto Acquir
e>, and select <Off> in <Auto Acquire>
<Apply> <OK>.
Black and white LCD model
● Select <Auto Acquir
e>, and set both <Select Protocol> and <Auto IP> to <Off>.
2
Select <Manually Acquire>.
3
Specify the IP address, subnet mask, and gateway address (or default gateway).
Touch panel model
● Enter <IP Addr
ess>, <Subnet Mask>, and <Gateway Address>, and select <Apply>.
Black and white LCD model
● Enter these values in each scr
een using the numeric keys, and press
.
5
For the touch panel model, select <OK>.
6
Restart the machine.
Restarting the Machine(P. 105)
Checking whether the settings are correct
● Mak
e sure that the Remote UI screen can be displayed with your computer (
Starting Remote
UI(P. 270) ). If a computer is not available, you can check the connection by using the operation panel (
Testing the Network Connection(P. 45) ).
Setting Up
44