Advanced User Guide
139
RAW Burst Mode
z
Use cards with 4 GB or more of free space.
z
Images may not be captured correctly if the battery runs out during image
processing while you are shooting in RAW burst mode with a slow-writing card
and low battery.
z
Display pauses when you press the shutter button halfway.
z
Camera shake or subject motion may cause image distortion.
z
ISO Auto is used when shooting in <
d
>, <
s
>, and <
f
> modes.
z
Shutter speeds slower than 1/30 sec. are not available in <
s
>, <
a
>,
or <
t
> mode.
z
Approx. 17.9 megapixels (5184×3456) are used in shooting.
z
Images are captured using the electronic shutter. Before you shoot, reading
“Shutter Release Method” (
=
186) is recommended.
z
Captured images will have a slightly narrower angle of view.
z
To view images in rolls on a computer, either extract JPEGs or use the EOS
application Digital Photo Professional.
z
If you connect the camera to a computer and use EOS Utility (EOS software),
set [
z
: RAW burst mode] to [Disable]. If [Enable] is selected, the camera
cannot communicate with the computer.
z
Maximum burst may be lower under low light.
z
In RAW burst mode, the aperture value will change if you zoom while pressing
the shutter button halfway or completely with zoom lenses that have variable
maximum aperture. To maintain the same exposure in <
a
> mode, shooting
with ISO Auto is recommended.
z
In RAW burst mode, even with some zoom lenses that do not have variable
maximum aperture, exposure may change if you zoom while pressing the
shutter button halfway or completely. For details, refer to the Canon website.
z
UHS-II SD Speed Class 10 or higher memory cards are recommended.
z
RAW images captured are saved in a single le (roll). File names begin with
CSI_ and end with the .CR3 le extension.
z
Picture Style, white balance, and Auto Lighting Optimizer settings determined
for the rst shot are applied as you shoot.
z
The camera does not beep as you are shooting.
z
[RAW burst mode] switches to [Disable] when the power switch is set to
<
2
>.