Advanced User Guide

532
Custom Function Setting Items
C.Fn II: Autofocus
C.Fn II-1: Limit AF methods
You can limit the AF methods available to
those that you will use.
For details on AF methods,
see
=
198–
=
200.
Add a checkmark [
X
] to the AF methods
to make available. Select [OK] to register
the setting.
z
The [
X
] mark cannot be removed from [1-point AF].
C.Fn II-2: Orientation linked AF point
You can assign AF points or Zone AF frames to di󰀨erent positions based on
whether you are shooting vertically or horizontally.
z
0: Same for both vertic./horiz.
AF points or Zone AF frames in the same position are used for both
vertical and horizontal shooting.
z
1: Separate AF pts: pt only
Separate AF point or Zone AF frame positions can be assigned for
each camera orientation (1. Horizontal, 2. Vertical with the camera grip
above, 3. Vertical with the camera grip below). Useful when switching to
AF points or Zone AF frames in other positions automatically based on
camera orientation.
AF points or Zone AF frames assigned to each of the three camera
orientations are retained.