User Manual

262
Time-lapse Movies
z
You can use Wireless Remote Control BR-E1 (sold separately) to start and stop
the time-lapse movie recording.
With Wireless Remote Control BR-E1
y
First, pair the Wireless Remote Control BR-E1 with the camera (
=
448).
y
Make sure [
z
: Remote control] is set to [Enable].
y
Take test shots, then when the camera is ready to shoot (as in step 15 on
=
258), set the BR-E1’s release timing/movie shooting switch to <
o
>
(immediate release) or <2> (release after 2-sec. delay).
y
If the remote control’s switch has been set to <
k
>, the time-lapse movie
recording cannot start.
Camera status/
remote control setting
<
o
> Immediate release
<2> 2-sec. delay
<
k
> Movie recording
Test-shooting screen Test-shooting To shooting-ready
Shooting-ready Starts shooting To test-shooting screen
During time-lapse
movie recording
Ends recording Ends recording