Owner's Manual

378
Cropping JPEG Images

Moving the Cropping Frame
Use <
j
> <
9
> to move the frame vertically or horizontally. Move the
cropping frame until it covers the desired image area.

Correcting the Tilt
You can correct image tilt by ±10°. Turn the <
5
> dial to select <
c
>,
then press <
0
>. While checking the tilt against the grid, turn the <
5
>
dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments)
on the upper left of the screen to correct the tilt. After completing the tilt
correction, press <
0
>.
4
Check the image area to be
cropped.

Turn the <
5
> dial to select <
b
>.
The image area to crop is displayed.
5
Save the image.

Turn the <
5
> dial to select <
W
>.

Select [OK] to save the cropped image.

Check the destination folder and image
fi le number, then select [OK].

To crop another image, repeat steps 2 to
5.
o
The position and size of the cropping frame may change depending on the
angle set for tilt correction.
o
Once a cropped image is saved, it cannot be cropped again or resized.
o
AF point display information (
=
392) and Dust Delete Data (
=
241) will not
be appended to the cropped images.