Advanced User Manual

218
M
Auto Correction of Brightness and
Contrast ( Auto Lighting Optimizer)
Brightness and contrast can be corrected automatically if shots look dark or
contrast is too low or high.
1
Select [z: Auto Lighting
Optimizer].
2
Set a correction option.
o
Noise may increase and clarity may change, under some shooting conditions.
o
If the eff ect of Auto Lighting Optimizer is too strong and results are not at your
preferred brightness, set to [Low] or [Disable].
o
If a setting other than [Disable] is set and you use exposure compensation
or fl
ash exposure compensation to darken the exposure, the image may still
come out bright. If you want a darker exposure, set this function to [Disable].
o
Maximum burst is lower with [High]. Image recording to the card also takes
longer
.
o
In step 2, if you press the <
B
> button and remove the checkmark [
X
] for
[Disabled in M or B modes] setting, [
z
: Auto Lighting Optimizer] can also
be set even in <
a
> and <
F
> modes.