Advanced User Manual

311
Recording Time-lapse Movies
You can use Remote Controller RC-6 (sold separately) or Wireless Remote
Control BR-E1 (sold separately) to start and stop the time-lapse movie recording.
Set [
z
: Remote control] to [Enable] beforehand.

With Remote Controller RC-6
Camera Status/Remote
Control Setting
<2> 2-sec. Delay
<
o
> Immediate
Release
Test-shooting screen To shooting-ready Still photo shooting
Shooting-ready
To test-shooting
screen
Starts shooting
During time-lapse movie
recording
Ends recording Ends recording

With Wireless Remote Control BR-E1
• First, pair the BR-E1 with the camera (
=
464).
• Take test shots, then when the camera is ready to shoot (as in step 16 on
=
307), set the BR-E1’s release mode/movie shooting switch to <
o
>
(immediate release) or <2> (release after 2-sec. delay).
• If the remote control’s switch has been set to <
k
>, the time-lapse movie
recording cannot start.
Camera Status/Remote
Control Setting
<
o
> Immediate
Release
<2> 2-sec. Delay
<
k
> Movie
Recording
Test-shooting screen Still photo shooting To shooting-ready
Shooting-ready Starts shooting
To test-shooting
screen
During time-lapse movie
recording
Ends recording Ends recording
Total Possible Time for Time-lapse Movie Recording
For guidelines on how long you can record time-lapse movies (until the
battery runs out), see
=
619.