Owner's Manual

120
Long (Bulb) Exposures
o
With [
z
: Long exp. noise reduction], you can reduce the noise generated
during long exposures (
=
238).
o
For bulb exposures, using a tripod and bulb timer is recommended. You can
also use mirror lockup (
=
263) in combination.
o
You can shoot bulb exposures by using Remote Switch RS-60E3 (sold
separately
,
=
156).
o
You can also use Remote Controller RC-6 (sold separately,
=
155)
or Wireless Remote Control BR-E1 (sold separately,
=
156) for bulb
exposures. When you press the remote controller
’s release (transmit) button,
the bulb exposure will start immediately or 2 sec. later
. Press the button again
to stop the bulb exposure.
Bulb Timer
M
Using the bulb timer eliminates the need to keep holding down the shutter
button during exposure.
1
Select [z: Bulb timer].
2
Select [Enable].

Select [Enable], then press the <
B
>
button.
3
Set the desired exposure time.

Select the hour, minute, or second.

Press <
0
> to display <
r
>.

Set the desired number, then press
<
0
>. (Returns to <
s
>.)