Owner's Manual

240
Noise Reduction Settings
Cautions for Setting Multi Shot Noise Reduction
o
If there is signifi cant misalignment in the image due to camera shake, the
noise reduction eff ect may become smaller.
o
If you are handholding the camera, keep it steady to prevent camera shake.
Using a tripod is recommended.
o
If you shoot a moving subject, the moving subject may leave afterimages.
o
Auto image alignment may not function properly with repetitive patterns (lattice,
stripes, etc.) or fl
at, single-tone images.
o
If the subject’s brightness changes as the four consecutive shots are taken,
irregular exposure in the image may result.
o
After shooting, it may take some time to record an image to the
card after
performing noise reduction and merging the images. “buSY” appears in the
viewfi
nder and on the LCD panel as images are processed, and shooting is
not possible until processing is fi
nished.
o
[Multi Shot Noise Reduction] is not available with bulb shooting, shooting
with AEB or WB bracketing, shooting RAW or RAW+JPEG images, or with
features such as long exposure noise reduction, multiple exposures, or HDR
mode.
o
Flash photography is not possible. Note that the
AF-assist beam of
EOS-dedicated, external Speedlites will be emitted according to the
[
z
:
AF-assist beam fi ring] setting.
o
[Multi Shot Noise Reduction] is not available (not displayed) when recording
movies.
o
Automatically switches to [Standard]
if you set the power switch to <
2
>,
replace the battery or card, switch to a Basic Zone or <
F
> shooting mode, or
switch to movie recording.