Owner's Manual

291
Movie Recording Quality Settings
Cards that Can Record Movies
For details on cards you can use for various movie recording sizes, see
=
617.
When recording movies, use a high-capacity card with a writing/reading
speed (as specifi ed in card performance requirements) shown in the
table on
=
617 or higher than the standard specifi cation. Test cards by
recording a few movies to make sure they can record correctly at your
specifi ed size (
=
288).
o
Format cards before recording 4K movies (
=
511).
o
If you use a slow-writing card when recording movies, the movie may not be
recorded properly. Also, if you play back a movie on a card with a slow reading
speed, the movie may not be played back properly.
o
When recording movies, use high-performance cards with a writin
g speed
suffi
ciently higher than the bit rate.
o
When movies cannot be recorded normally, format the card and try again.
If formatting the card does not resolve the problem, refer to t
he card
manufacturer’s website, etc.
o
To obtain better performance with the card, formatting the card with the
camera before recording movies is recommended (
=
511).
o
To check the card’s writing/reading speed, refer to the card manufacturer’s
website, etc.