Owner's Manual

302
Recording Time-lapse Movies
7
Set the number of shots.

Select [No. of shots]. Use the <
Y
>
<
Z
> keys to set a value, then press
<
0
>.

Refer to the [
k
: Time required] and
[
3
: Playback time] to set the number.
When [Custom] is set

Select the digit.

Press <
0
> to display <
r
>.

Set the desired number with the <
W
>
<
X
> keys, then press <
0
>. (Returns
to <
s
>.)

Check that [
3
: Playback time] is not
displayed in red.

Select [OK] to register the setting.
o
With [Scene**], available intervals and numbers of shots are restricted, to suit
the type of scene.
o
For cards that can record time-lapse movies (card performance requirements),
see
=
617.
o
If the number of shots is set to 3600, the time-lapse movie will be approx. 2
min. in NTSC and approx. 2 min. 24 sec. in P
AL.