Owner's Manual

16
Specifi cations
■ Autofocus
[Viewfi nder shooting]
Type: TTL secondary image-registration, phase-diff erence
detection with the dedicated AF sensor
AF points: Cross-type AF point: Max. 45 points
* Number of available AF points, Dual cross-type AF points,
and Cross-type AF points vary depending on the lens
used.
* Dual cross-type focusing at f/2.8 with center AF point
when Group A (of the AF groups) lenses are used.
Focusing brightness range: EV –3 to 18 (with the center AF point supporting f/2.8,
One-Shot AF, room temperature, ISO 100)
Focus operation: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
AF area selection mode: Single-point Spot AF (manual selection), Single-point AF
(manual selection), Zone AF (manual selection of zone),
Large zone AF (manual selection of zone), Automatic
selection AF
AF point automatic
selection conditions:
Automatic AF point selection possible based on color
information
AI Servo AF
characteristics:
Characteristics can be set with Custom Functions for
Tracking sensitivity, Acceleration/deceleration tracking, and
AF point auto switching
AF fi ne adjustment: AF Microadjustment (All lenses by the same amount,
Adjust by lens)
AF-assist beam: Series of small fl ashes fi red by the built-in fl ash, in an
eff ective range of approx. 4.0 m (13.1 ft.)
[Live View shooting]
Focus method: Dual pixel CMOS AF
AF method: Face+Tracking, Spot AF, 1-point AF, Zone AF
Available AF point
positions:
Max. 5,481
* When selected with the Multi-controller
Available AF areas when
automatically selected:
Max. 143
Magnifi ed view: Approx. 5×/10×