Owner's Manual

z : Manual
z When the ISO speed is xed, you can compare your specied value
(where the exposure level indicator moves) to the standard exposure
level by pressing the shutter button halfway. The exposure level indicator
appears as [
] or [ ] when the difference from standard exposure
exceeds 3 stops.
z After you set the shutter speed and aperture value, the exposure level
indicator may change if you adjust the zoom or recompose the shot.
z When the ISO speed is xed, screen brightness may change depending
on your specied shutter speed and aperture value. However, screen
brightness remains the same when the ash is up and the mode is set to
[
].
z Exposure may not be as expected when the ISO speed is set to [AUTO],
because the ISO speed is adjusted to ensure standard exposure relative to
your specied shutter speed and aperture value.
z Image brightness may be affected by Auto Lighting Optimizer. To keep the
Auto Lighting Optimizer disabled in
mode, add a [ ] mark to [Disable
during man expo] on the Auto Lighting Optimizer setting screen.
z Calculation of standard exposure is based on the specied metering
method.
z To adjust exposure when ISO speed is set to [AUTO], turn the exposure
compensation dial.
94