User's Manual

◦ Enable/disable Wi-Fi

Select Enable to wirelessly connect via wireless router.

◦ Wi-Fi setup

Select how to setup Wi-Fi.

◾ Easy wireless connect

Select if you specify the settings of the access point information to the printer directly from a

device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen

instructions of the connecting device for the setup procedure.

◾ Manual connect

Select when you perform settings for Wi-Fi manually using the operation panel of the printer.

◾ WPS (Push button method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected

Setup (WPS) push button method. Follow the on-screen instructions during setup.

◾ Other connection types

◾ Manual connect (adv.)

Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.

◾ WPS (PIN code method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi

Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

Note

• By tapping Advanced, you can set LAN in detail.

For the items that can be set, see the following.

Advanced

• Wireless Direct

The following setting information on the Wireless Direct connection is displayed. (Some items are not

displayed depending on printer settings.)

Items Setting

Connection Enabled (connected) / Enabled (disconnected) / Disa-

ble

Network (SSID)/device name DIRECT-XXXX-TA-30

Password XXXXXXXXXX (10 characters)

Communication mode Wireless Direct

Channel 3

Wi-Fi security WPA2-PSK (AES)

IPv4 address XXX. XXX. XXX. XXX (12 characters)

IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)

146