User's Manual

Paper is not cut straight
Check 1
Is the edge of the paper cutting position creased?
Straighten out any curling by the edges of the paper.
Check 2
Is the edge of the paper cutting position lifting up when cutting?
Reload the paper correctly.
Check 3
Is the paper a type that can be cut with the cutter blade?
Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement
such as scissors.
Specifying the Cutting Method for Rolls
Check 4
Are you using the basket properly?
Make sure that you are using the basket properly.
Using the Basket
Check 5
Check that the Cut speed setting is correct.
Select Paper settings > Advanced on Paper menu in the touch screen menu, and change Cut speed.
If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut
speed than that selected currently.
If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut
speed than that selected currently.
Select Paper settings > Advanced on Paper menu in the touch screen menu, and change the Cut speed
setting.
Menu Structure
Check 6
Did the printing material slip diagonally while being cut?
Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has
printed.
Specifying the Cutting Method for Rolls
Check 7
Is the cutter blade attached properly?
Attach the cutter blade properly.
Replacing the Cutter Blade
682