User's Manual
Receiving Printer Status by E-mail
You receive the printer status information such as the remaining ink level and the error from the printer.
*This function may not be available depending on the country or region of purchase.
Note
• Specify the mail server settings in advance.
Setting Mail Server
• If you did not specify the date and time setting using the printer's operation panel, the date and time
may not be reflected on the sent e-mail. We recommended that you set the date and time setting using
the printer's operation panel.
For the date and time setting, see Other device settings.
• These functions can be set only when you are logged in administrator mode.
1.
Start up Remote UI.
2.
Select Device settings.
3.
Select Status notification e-mail.
4.
Select Notification recipients.
5.
Specify destination settings.
Up to 5 destinations can be registered by following the steps below.
1.
Select number of destination.
2.
Select Add.
3.
Enter e-mail address, and then select printer status to send information.
4. Select OK.
The registration for destination is completed.
6. Select Device settings > Status notification e-mail > Retry settings.
7. Specify resending settings.
The number of resending can be specified by following the steps below.
1. Specify number of resending.
2. Specify interval of resending.
242