Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Recording Format
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Using Line Input or an External Microphone Connected to an INPUT Terminal
- Audio Recording Level (INPUT Terminals)
- Adjusting the Microphone’s Sensitivity (INPUT terminals)
- Microphone Attenuator (INPUT terminals)
- Using the Built-in Microphone or an External Microphone Connected to the MIC Terminal
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Sensitivity (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone or MIC Terminal)
- Low-Cut Filter (Built-in Microphone or MIC Terminal)
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Precautions About the Battery Pack
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Warranty
Connecting
to
an External
Monitor
Connecting to an External Monitor
When
you
connect
the
camcorder
to
an external
monitor
for
playback, use
the
terminal
that
matches
the
one
you
with
to
use
on
the
monitor
(f:l:monly)
or
the
HDMI
OUT
terminal. Then,
select
the
video
signal
output
configuration.
~PDF> Connecting to an External
Monitor
@
REMOTE
CD
NOTES
HTC-100
High
Speed
HDMI
Cable
(optional)
HDMI
IN
terminal
n[I)•l----------m+
SDI
OUT
SDI
IN
terminal*
terminal
•
We
recommend powering the camcorder using the compact power adapter.
.
I
DODD
I
*f:l:monly
•
The
HDMI
OUT
terminal on the camcorder
is
for output only.
Do
not connect it to
an
HDMI
output terminal
on
an
external device, as this may damage the camcorder.
• Video may not be output correctly depending
on
the monitor.
23
I