User Manual

Menu Options
105
• The tele-converter increases the focal length by a factor of approximately 1.5 while the wide
attachment decreases it by a factor of approximately 0.75.
• When you select a setting other than [j Off], the AF mode is automatically set to [@ Normal
AF].
• The approximate focusing distance displayed on the screen will change depending on the setting. If
you are not using an optional conversion lens, select [j Off].
[Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS]
(A 63).
[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority]: Convenient for times when you need to use a particular white balance setting
frequently. You can press an assignable button set to [Ä WB Priority] to switch between the current
white balance and the white balance setting selected for [Set WB Priority].
[Focus/Zoom Ring Operation]: Selects whether to enable or disable the focus/zoom ring's operation.
[Focus Ring Direction]: Changes the direction the focus/zoom ring needs to be turned when focusing.
This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom
ring switch is set to FOCUS).
[Focus Ring Response]: Selects the sensitivity of the response when focusing using the focus/zoom
ring. This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/
zoom ring switch is set to FOCUS).
[Zoom Ring Direction]: Changes the direction the focus/zoom ring needs to be turned when using it to
adjust the zoom (when the focus/zoom ring switch is set to ZOOM).
[IR Light]: Turns the infrared light on and off. The light is located on the handle unit so make sure you
attach it to the camcorder in advance.
• If set to [i On], the infrared light is always on when the camcorder is in infrared mode.
[É Playback Setup] menu ( mode only)
[Data Code]: For clips, displays the date a clip was recorded. For photos, displays the date and/or time
or camera setting used when a photo was recorded.
Menu item Setting options A
y }
[¸ Data Code] [j Off], [% Date]  – –
[{ Data Code] [j Off], [% Date], [& Time], [ Date and Time],
[{ Camera Data]
– 