User Manual

Zooming

Digital Tele-Converter

Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor

of approx. 2 and record the enlarged image.

1 Select [Digital Zoom].

> [v ! Camera Setup] > [Digital Zoom]

2 Select [ Digital Tele-conv.] and then select [X].

3 Open the zoom controls.

[FUNC] > [R Zoom]

4 Select [ ] (digital tele-converter) and then select [X].

• The center of the screen will be enlarged approximately 2 times and the icon will appear.

• Select [ ] again before closing the screen to deactivate the digital tele-converter.

NOTES

• You can attach the optional tele-converter and use it in conjunction with this function to increase the

effect.

• The digital tele-converter cannot be set while recording or when > [v Camera Setup] >

[Conversion Lens] is set to [¿ WA-H58].

• The image is digitally processed so the image will deteriorate throughout the zoom range.

• The digital tele-converter will be deactivated if the resolution is switched between 3840x2160 and

another one.

Operating modes: