Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Recording Format
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Using Line Input or an External Microphone Connected to an INPUT Terminal
- Audio Recording Level (INPUT Terminals)
- Adjusting the Microphone’s Sensitivity (INPUT terminals)
- Microphone Attenuator (INPUT terminals)
- Using the Built-in Microphone or an External Microphone Connected to the MIC Terminal
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Sensitivity (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone or MIC Terminal)
- Low-Cut Filter (Built-in Microphone or MIC Terminal)
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Precautions About the Battery Pack
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Warranty
Using
SD
Cards
18
Using SD Cards
Use commercially available
S_,.
SD,
~
SDHC
(SD
High Capacity) or
~
SDXC
(SD
extended Capacity) cards. Make sure you use a compatible SD card.
~PDF)
Using
SD
Cards
1 Turn
off
the
camcorder.
• Make sure the POWER/CHG indicator
is
off
(CD).
2 Open
the
SD
card
compartment
cover
(®).
3 Insert the
SD
card straight,
with
the label facing
the
front
of
the
camcorder, all
the
way
into
one
of
the
SD
card slots.
• Close the
SD
card compartment cover.
Do
not force it closed if the
SD
card
is
not correctly
inserted.
~
....
-.;:.!!:·
.:
-
~
t
To
remove
the
SD
card
click!
The label
of
the SD
card facing the lens
1
Make
sure
the
ACCESS
indicator is off.
2 Push
the
SD
card
once
to
release it. When
the
SD
card springs out, pull
it
all
the
way
out.
0
IMPORTANT
• SD cards have front and
back
sides that are not interchangeable. Inserting an SD card facing the wrong
direction can cause a malfunction
of
the camcorder.
• Initialize
SD
cards when you use them with this camcorder for the first time.
~PDF)
Initializing
an
SD
Card
CD
NOTES
• SD cards have a physical switch
to
prevent writing on the card
so
as
to
avoid the accidental erasure
of
the
card's
content. To write-protect the
SD
card, set the switch
to
the
LOCK
position.