Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Recording Format
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Using Line Input or an External Microphone Connected to an INPUT Terminal
- Audio Recording Level (INPUT Terminals)
- Adjusting the Microphone’s Sensitivity (INPUT terminals)
- Microphone Attenuator (INPUT terminals)
- Using the Built-in Microphone or an External Microphone Connected to the MIC Terminal
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Sensitivity (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone or MIC Terminal)
- Low-Cut Filter (Built-in Microphone or MIC Terminal)
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Precautions About the Battery Pack
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Warranty
CUSTOM Dial and Button
84
Customization
CUSTOM Dial and Button
You can assign to the CUSTOM button and dial one of several frequently used functions. You can then
adjust the selected function using the CUSTOM button and dial, without having to access the menu.
1 Select [CUSTOM Dial & Button].
> [B # System Setup] > [CUSTOM Dial &
Button]
2 Select the desired option and then select [X].
3 Press the CUSTOM button and turn the CUSTOM dial
to use the assigned function as described in the
following explanations.
• The onscreen value that can be adjusted using the
CUSTOM dial will be highlighted in orange.
Options
NOTES
• Instead of the procedure above, you can press and hold the CUSTOM button to display a quick
menu of the options. Use the CUSTOM dial to select the desired option and then press the
CUSTOM button.
Operating modes:
[ Tv/Av/M]: When the shooting mode is set to ‚ or “, turn the CUSTOM dial to adjust the
shutter speed or aperture value, respectively.
When the shooting mode is set to n, press the CUSTOM button repeatedly to
select the value you wish to adjust (aperture value shutter speed gain value).
While the desired value is highlighted in orange, turn the dial to adjust it.
[ AGC Limit]: Press the CUSTOM button to turn the AGC limit on/off. When the AGC limit is
activated, turn the dial to set the maximum gain value.
[y Exposure Comp.]:
Press the CUSTOM button to lock the exposure. Whether the exposure is locked
or not, you can turn the dial to compensate the exposure.
[j Off]: Disables the CUSTOM button and dial.
4
Customization