Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Recording Format
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Using Line Input or an External Microphone Connected to an INPUT Terminal
- Audio Recording Level (INPUT Terminals)
- Adjusting the Microphone’s Sensitivity (INPUT terminals)
- Microphone Attenuator (INPUT terminals)
- Using the Built-in Microphone or an External Microphone Connected to the MIC Terminal
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Sensitivity (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone or MIC Terminal)
- Low-Cut Filter (Built-in Microphone or MIC Terminal)
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Precautions About the Battery Pack
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Warranty
Assignable Buttons
86
Assignable functions
* Requires that the handle unit be correctly attached to the camcorder.
Function name Description A
[B AF/MF] Switches between autofocus and manual focus. 57
[~ Face Only AF] Switches between standard autofocus and autofocus only when a face is
detected.
62
[^ Magnification] Turns magnification on/off. 59
[ BLC Always On] Turns the constant backlight correction function on/off. 47
[± Powered IS] Turns powered IS on/off. 63
[Å Set WB] Registers a custom white balance setting. This is not available for the
onscreen assignable button.
49
[Ä WB Priority] Switches between the current white balance setting and a priority white
balance setting registered with the > [v Camera Setup] >
[Set WB Priority] setting.
103
[< IR Light]* When infrared recording is activated, turns the camcorder's infrared light
on/off.
80
[z Pre REC] Turns pre-recording on/off. 78
[ Rec Review] Reviews the last clip recorded. 36
[ Photo] Records a photo. 34
[œ Monitor Channels] Changes the audio channels output from the × (headphone) terminal. 99
[ Menu] Displays/Hides the menu. 102
[j Off] No function assigned – the button is disabled. —