User Manual

Video Output Configuration
94
External Connections
Video Output Configuration
The video signal output from the SDI OUT terminal (s only) and HDMI™ OUT terminal depends
on the clip's video configuration and on various menu settings. The video signal output from the HDMI
OUT terminal can also change depending on the capabilities of the connected monitor.
s The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminal
simultaneously.
Video Output Configuration (Recording)
1
> [£ Display Setup] > [SDI/HDMI Scan Mode] (s) or [HDMI Scan Mode] (t)
setting.
2
For HDMI output: > [£ Display Setup] > [HDMI Max Resolution] setting.
s For SDI output: > [£ Display Setup] > [SDI Output] setting.
3
The frame rate is 59.97P during slow & fast motion recording.
4
s only.
5
HDMI output only. Only when the frame rate is set to 59.97P. Automatically selected depending on the
capabilities of the connected monitor.
Operating modes:
Recording video
configuration
Scan mode
setting
1
Maximum
resolution
setting
2
Video output configuration
Resolution Frame rate Resolution Frame rate Color sampling
3840x2160
29.97P
23.98P
P
1920x1080 1920x1080
Same as that for
video
configuration
3
YCbCr 4:2:2
8 bit
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080
SDI output
4
:
29.97PsF
(59.94i)
HDMI output:
59.94i
1920x1080
59.94P
29.97P
23.98P
P
1920x1080
1920x1080
720x480
5
Same as that for
video
configuration
3
YCbCr 4:2:2
10 bit
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080
SDI output
4
:
29.97PsF
(59.94i)
HDMI output:
59.94i
1280x720 59.94P — — 1280x720 59.94P
6
External Connections