Owner's Manual
Table Of Contents
- Instruction Manual
- Reset All
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Using the Mini Advanced Shoe
- Recording Audio
- Using an External Microphone
- Audio Scenes
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Attenuator (Built-in Microphone or External Microphone)
- Low-Cut Filter (MIC Terminal)
- Wind Screen (Built-in Microphone)
- Microphone Directionality (Built-in Microphone)
- Audio Equalizer (Built-in Microphone)
- Audio Limiter
- Audio Compressor
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Optional Accessories
- Specifications
Menu Options
100
[Available Space in Memory]/[Used Space in Memory]: Displays a screen where you can verify how much
of the SD card is currently available for recording or how much is in use (« total recording time and
ª total number of photos).
• Estimated figures about available clip recording time and available number of photos are
approximate and based on the video configuration currently in use and a photo size of 1920x1080.
• You can also check the SD card's Speed Class.
[HDMI Time Code]: When set to [i On], the HDMI signal output from the camcorder includes the
camcorder's time code.
[MP4 Clip / Photo Numbering]: Clips and photos are saved as files in folders. You can select the file
numbering method for those files. File numbers appear on screens in playback mode in a format such
as "101-0107". The first 3 digits indicate the folder number and the last 4 digits are different for each
file in a folder.
[m Reset]: File numbers will restart from 100-0001 every time you insert a new (or initialized) SD
card. If the card already contains previous recordings, file numbers will continue from the number
following that of the last recording on the SD card.
[n Continuous]: File numbers will continue from the number following that of the last file recorded
with the camcorder. This setting is the most convenient for managing files on a computer. We
recommend using the [n Continuous] setting.
Understanding folder names
• An example folder name is “101_1025”. The first 3 digits indicate the folder number (from 100 to
999) and the last 4 digits indicate the month and day when the folder was created. In the example,
the folder numbered 101 was created on October 25.
• Each folder can contain up to 500 files (clips and photos combined). When that number is
exceeded, a new folder is created automatically.
[Used Space in
Memory]
[6], [7] – –
[Initialize 8] [6 Mem. Card A], [7 Mem. Card B] 30
[Rec Command] [i On], [j Off] – 33
[HDMI Time Code] [i On], [j Off] – –
[Time Code Mode] [ Preset], [ Regen.] – 61
[Time Code Running
Mode]
[ Rec Run], [ Free Run] – 61
[DF/NDF] [ DF], [ NDF] – 63
[Initial Time Code] 00:00:00.00 to 23:59:59.29, [Reset] – 62
[User Bit Type] [ Setting], [ Time], [ Date];
[i]: user bit input screen (00 00 00 00
to FF FF FF FF).
– 64
[Color Bars] [j Off], [ SMPTE], [ ARIB] – 74
[1 kHz Tone] [ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off] – 74
[MP4 Clip / Photo
Numbering]
[m Reset], [n Continuous] –
Menu item Setting options A