Owner's Manual
Table Of Contents
- Instruction Manual
- Reset All
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Using the Mini Advanced Shoe
- Recording Audio
- Using an External Microphone
- Audio Scenes
- Audio Recording Level (Built-in Microphone/MIC Terminal)
- Microphone Attenuator (Built-in Microphone or External Microphone)
- Low-Cut Filter (MIC Terminal)
- Wind Screen (Built-in Microphone)
- Microphone Directionality (Built-in Microphone)
- Audio Equalizer (Built-in Microphone)
- Audio Limiter
- Audio Compressor
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Using the Optional RC-V100 Remote Controller
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
- Quick Guide
- Important Usage Instructions
- Supplied Accessories
- Table of Contents
- Names of Parts
- Charging the Battery Pack
- Basic Preparations
- Setting the Date, Time and Language
- Using SD Cards
- Recording Clips and Photos
- Playing Back and Saving Clips and Photos
- Connecting to an External Monitor
- Onscreen Icons and Displays
- Safety Instructions and Handling Precautions
- Others
- Abridged Specifications
- Additional Information
- Optional Accessories
- Specifications
Color Bars/Audio Reference Signal
74
Color Bars/Audio Reference Signal
You can have the camcorder output and record color bars and a 1 kHz audio reference signal and
output them from the HDMI OUT terminal and × (headphone) terminal (audio reference signal only).
Recording Color Bars
You can choose between SMPTE and ARIB color bars.
1 Select [Color Bars].
> [3 # Recording Setup] > [Color Bars]
2 Select the desired option and then select [X].
• The selected color bars appear on the screen and will be recorded when you press the START/
STOP button.
NOTES
• This function cannot be used together with slow & fast motion recording.
Recording an Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 Select [1 kHz Tone].
> [3 # Recording Setup] > [1 kHz Tone]
2 Select the desired option and then select [X].
• You can select one of three audio levels (–12 dB, –18 dB, –20 dB) or select [j Off] to turn off
the signal.
• The signal is output at the selected level and will be recorded when you press the START/STOP
button.
Operating modes: