User Manual

Setting the Time Code

Selecting Drop Frame or Non-Drop Frame

You can select between a drop frame (DF) or non-drop frame (NDF) time code, depending on how you

plan to use your recordings. However, when the frame rate is set to 23.98P, the time code is set to

non-drop frame (NDF) and cannot be changed.

1 Select [DF/NDF].

> [3 # Recording Setup] > [DF/NDF]

2 Select [ DF] or [ NDF] and then select [X].

• The time code display will differ depending on the setting. When you select [ DF], the time

code will appear as [00:00:00.00]; when you select [ NDF], it will appear as [00:00:00:00].

NOTES

• When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time

code at the point where the recording starts.