Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video and Photos
- Video Configuration: Video Format, Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Adjusting the Focus
- Zooming
- Image Stabilization
- Automatic Gain Control (AGC) Limit
- Shooting Modes
- Adjusting the Exposure
- ND Filter
- White Balance
- Using Looks
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Format of MP4 Clips
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Recording Audio from the INPUT Terminals to CH1/CH2
- Recording Audio from the Built-In Microphone or MIC Terminal to CH1/CH2
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the Optional GP-E2 GPS Receiver
- Customization
- Playback
- External Connections
- Saving Clips
- Additional Information
- Quick Guide
- Warranty
Audio Output
110
Audio Output
The camcorder can output audio from the SDI OUT terminal (u only), HDMI OUT terminal, × (headphone)
terminal or built-in speaker (monaural audio; mode only). When recording or playing back clips recorded
with 4-channel audio, you can select which audio channels are output.
Audio output configuration
1
> [3 Recording Setup] > [¸ Audio Format].
2
You can select the pair of audio channels that are output from the terminal.
Selecting the Audio Channels for Headphone or Speaker Output
You can select the audio channels that are output from the × (headphone) terminal or speaker.
1 Select [Monitor Channels].
> [¡ # Audio Setup] > [Monitor Channels]
2 Select the desired option and then select [X].
* For MP4 clips: In mode, these options are available only during 4-channel audio recording.
NOTES
• If you set an assignable button to [œ Monitor Channels] (A 94), you can press the button to toggle
between the audio channel output options.
MP4 audio format
1
Audio configuration of the
recorded clips
Audio output configuration
u SDI OUT terminal HDMI OUT terminal
2
[ LPCM 16bit 4CH]
4-channel linear PCM,
16 bit
4-channel linear PCM,
24 bit
2-channel linear PCM,
16 bit
[ AAC 16bit 2CH]
2-channel MPEG-2 AAC-LC,
bit rate: 256 kbps
Operating modes:
Setting
Audio output
L R
[ƒ CH1/CH2] CH1 CH2
[š CH1/CH1] CH1 CH1
[Ÿ CH2/CH2] CH2 CH2
[ CH1+2/CH1+2] CH1+CH2 mixed CH1+CH2 mixed
[ CH3/CH4]* CH3 CH4
[ CH3/CH3]* CH3 CH3
[ CH4/CH4]* CH4 CH4
[ CH3+4/CH3+4]* CH3+CH4 mixed CH3+CH4 mixed
[ CH1+3/CH2+4]* CH1+CH3 mixed CH2+CH4 mixed