Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the Camcorder
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video and Photos
- Video Configuration: Video Format, Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Adjusting the Focus
- Zooming
- Image Stabilization
- Automatic Gain Control (AGC) Limit
- Shooting Modes
- Adjusting the Exposure
- ND Filter
- White Balance
- Using Looks
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Selecting the Audio Format of MP4 Clips
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Recording Audio from the INPUT Terminals to CH1/CH2
- Recording Audio from the Built-In Microphone or MIC Terminal to CH1/CH2
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Infrared Recording
- Using the Optional RC-V100 Remote Controller
- Using the Optional GP-E2 GPS Receiver
- Customization
- Playback
- External Connections
- Saving Clips
- Additional Information
- Quick Guide
- Warranty
59
Zooming
NOTES
NOTES
• You can attach the optional TL-U58 Tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be activated while recording or when > [v Camera Setup] >
[Conversion Lens] is set to [¿ WA-U58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
• The digital tele-converter will be deactivated if the resolution is switched between 3840x2160 and another
setting.