User Manual

Menu Options
104
[Æ Recording Setup] menu
Menu item Setting options and additional information
[¸ Resolution] [3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)], [1920x1080 (17 Mbps)],
[1280x720 (8 Mbps)]
(A 40)
[¸ Frame Rate] [¼ 59.94P], [» 29.97P], [º 23.98P] (A 40)
[Recording Media] [v Rec Media for Movies]: [6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]: [6 Mem. Card A], [7 Mem. Card B]
(A 33)
[Dual/Relay Recording] [v Standard Recording], [4 Dual Recording], [ Relay Recording]
(or [ Relay Recording])
(A 33)
[Slow & Fast Motion] [j Off], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120], [x600], [x1200] (A 41)
[Available Space in Memory],
[Used Space in Memory]
[6] (SD card A), [7] (SD card B)
Displays a screen where you can check the SD card's total space and speed class as well as the
following information:
mode only: Available space and estimates for remaining recording time (MP4 clips) and
remaining number of photos. Estimates are based on current settings.
mode only: Amount of space in use.
[Initialize 8] [6 Mem. Card A], [7 Mem. Card B] (A 32)
[Rec Command] [i On], [j Off]
When this setting is set to [i On], you can use the camcorder’s REC button to control also the
recording operation of a compatible external recorder connected to the HDMI OUT terminal.
[HDMI Time Code] [i On], [j Off] (A 97)
When this setting is set to [i On], the HDMI signal output from the camcorder (only in
mode) includes the camcorder's time code.
[Time Code Mode] [ Preset], [ Regen.] (A 66)
[Time Code Running Mode] [ Rec Run], [ Free Run] (A 66)
[DF/NDF] [ DF], [ NDF] (A 67)
[Initial Time Code] Time code input screen (00:00:00.00 to 23:59:59.29) (A 66)
[User Bit Type] [ Setting], [ Time], [ Date];
[i] (user bit input): 8 hexadecimal characters (00 00 00 00)
(A 68)
[Color Bars] [j Off], [ SMPTE], [ ARIB] (A 77)
[1 kHz Tone] [ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off] (A 77)
[MP4 Clip / Photo Numbering] [m Reset], [n Continuous]
MP4 clips and photos are saved as files in folders. You can select the numbering method for those
files. File numbers appear on screens in playback mode in a format such as "101-0107". The first 3
digits indicate the folder number and the last 4 digits are different for each file in a folder.
[m Reset]: MP4 clip/photo numbers will restart from 100-0001 every time you insert a new (or
initialized) card. If the card already contains previous recordings, numbers will continue from the
number following that of the last MP4 clip or photo on the card.
[n Continuous]: MP4 clip/photo numbers will continue from the number following that of the last
MP4 clip or photo recorded with the camcorder. This setting is the most convenient for managing
files on a computer. We recommend using the [n Continuous] setting.