User Manual

Using the Optional GP-E2 GPS Receiver
80
Using the Optional GP-E2 GPS Receiver
When the optional GP-E2 GPS Receiver is connected to the camcorder’s USB terminal, the camcorder will
automatically record the GPS information (longitude, latitude and altitude) and coordinated universal time (UTC)
with the clips and photos you record.
The recorded GPS information can be checked on the clip information screen or photo playback screen (single
photo view).
Connecting the GPS Receiver
Turn off the camcorder and the receiver. Connect the receiver to the camcorder’s USB terminal using the USB
cable*. While recording, place the receiver in the carrying case* and attach it to the camcorder’s grip belt or carry
it on your person. For details about connecting and using the receiver, refer to the GP-E2 Instruction Manual.
* Supplied with the receiver.
Activating the GPS Receiver
Turn on the camcorder and receiver.
• The icon appears on the left of the screen and will flash as the receiver tries to acquire satellite signals.
• When satellite signals are correctly acquired, the icon will stay continuously on. GPS functions will be
activated and clips and photos recorded thereafter will be geotagged.
Operating modes:
To ad j u st the date and time automatically according to the GPS data
You can set > [B System Setup] > [GPS Auto Time Setting] to [i Auto Update] to have the
camcorder automatically adjust its date and time settings according to the information received from the GPS
signal. The date and time will be updated automatically the first time a correct GPS signal is acquired after
turning on the camcorder.
• While the automatic date/time adjustment is activated, the > [B System Setup] > [Date/Time]
setting will not be available.
• The time will not be updated while recording video.