User Manual

Saving and Loading Menu Settings

After you adjust settings in the various menus, you can save those settings on an SD card. Only SD card B can

be used to save and load menu settings files. You can load those settings at a later date or on another HF G60

camcorder so that you can use that camcorder in the same way.

Saving Menu Settings

1Insert the card where you want to save the menu settings into SD card slot B.

2 Select [Save].

> [B # System Setup] > [Backup Menu Settings 7] > [Save]

3 Select [Yes].

• The camcorder’s menu settings will be saved to the card. If menu settings were previously saved, the old file

will be overwritten by the current menu settings.

4 When the confirmation message appears, select [OK].

Loading Menu Settings

1Insert the card with the desired menu settings file into the camcorder's SD card slot B.

2 Select [Load].

> [B # System Setup] > [Backup Menu Settings 7] > [Load]

3 Select [Yes].

• The camcorder’s menu settings will be replaced by the settings saved on the card. Then, the screen will turn

black momentarily and the camcorder will restart.

Operating modes: