User Manual

Connecting to an External Monitor
98
• The time code signal will not be output from the HDMI OUT terminal in the following cases:
-In mode.
- When the video output signal is 720x480 / 59.94P.
- When slow & fast motion recording is activated.
• When the frame rate is 23.98P and one of the following is also true, the frames value in the time code will run
from 0 to 29 instead of 0 to 23.
- > [£ Display Setup] > [HDMI Scan Mode] is set to [ PsF (Forced 1080i)].
- The output resolution is set to 1280x720.
Selecting the Video Output’s Scan Mode
When using external devices that support only interlaced scanning, you can change the scan mode of the video
signal output from the HDMI OUT terminal.
1 Select [HDMI Scan Mode].
> [£ ! Display Setup] > [HDMI Scan Mode]
2 Select the desired option and then select [X].