User Manual

251
Flash Control
Flash Firing
Set to [
a
] to have the ash re
automatically, based on shooting
conditions.
Set to [
D
] to have the ash always re
when you shoot.
Set to [
b
] to disable ash ring.
z
The information displayed varies by shooting mode.
z
Can also be set (except in some shooting modes) by pressing the <
D
> button
when the shooting mode switch is set to <
A
> or <
z
>.
E-TTL II Flash Metering
M
For normal ash exposures, set it to
[Evaluative]. If [Average] is set, the ash
exposure will be averaged for the entire
metered scene.
Red-eye Reduction
Set to [Enable] to reduce red-eye by
emitting the red-eye reduction lamp
(
=
36) before ring the ash.