User Manual

254
Flash Control
z
Shutter synchronization
Normally, set this to [1st curtain] so
that the ash res immediately after the
exposure starts.
Set to [2nd curtain] and use low shutter
speeds for natural-looking shots of subject
motion trails, such as car headlights.
z
When using second-curtain synchronization, set the shutter speed to 1/80
sec. or slower. If the shutter speed is 1/100 sec. or faster, rst-curtain
synchronization will be applied automatically even if [2nd curtain] is set.
z
Flash exposure compensation
Just as exposure compensation is
adjustable, you can also adjust ash output
(
=
248).
Clearing Built-in Flash Settings
1
Select [Clear settings].
2
Select [OK].
z
The default settings are now restored.