User Manual
484
Troubleshooting Guide
I cannot set the exposure compensation when both manual
exposure and ISO Auto are set.
z
See
=
113 to set the exposure compensation.
Not all the lens aberration correction options are displayed.
z
Although [Chromatic aberr corr] and [Diraction correction] are
not displayed when [Digital Lens Optimizer] is set to [Enable], both
functions are applied in shooting, as when set to [Enable].
z
During movie recording, [Distortion correction], [Digital Lens
Optimizer], or [Diraction correction] will not be displayed.
The ash does not re.
z
Shooting with the ash may be temporarily disabled to protect the ash
head if the ash is used repeatedly over a short period.
Using ash in [
f
] or [
d
] mode lowers the shutter speed.
z
To provide standard exposure for subjects and backgrounds, the shutter
speed is automatically reduced (slow-sync shooting) for shots under
low light in night scenes or with similar backgrounds. To prevent a slow
shutter speed, under [
z
: Flash control], set [Slow synchro] to [1/200-
1/60sec. auto] or [1/200 sec. (xed)] (
=
252).
The specied exposure changes when I shoot with ISO Auto
using ash.
z
When there is a risk of overexposure in ash photography, shutter
speed or ISO speed is automatically adjusted to reduce loss of detail in
highlights and shoot at standard exposure. In ash shots with certain
lenses, shutter speeds and ISO speeds displayed when you press the
shutter button halfway may not match the actual settings used. This may
alter the brightness of backgrounds that are out of ash range.
z
To avoid shooting at dierent shutter speeds or ISO speeds than
displayed when you press the shutter button halfway in [
d
], [
s
], [
f
],
or [
a
] mode, shoot with a manually set ISO speed.