User Manual

• If the print head alignment sheet was not printed correctly, press the Stop button, and redo this
procedure from the beginning.
5. Place print head alignment sheet on platen.
Place the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark
on the upper left corner of the sheet with the alignment mark .
6.
Close the document cover gently, then press the Black button or the Color button.
The printer starts scanning the print head alignment sheet, and the print head position will be adjusted
automatically.
The print head position adjustment will be complete when the ON lamp lights after flashing.
Remove the print head alignment sheet on the platen.
Important
•
Do not open the document cover or move the print head alignment sheet on the platen until
adjusting the print head position is complete.
• If adjusting the print head position has failed, the Alarm lamp lights up. Press the OK button to
release the error, then take appropriate action.
When Error Occurred
Note
• For Windows, when the print results are still not satisfactory after adjusting the print head position as
described above, adjust the print head position manually from the computer.
Adjusting Print Head Position Manually
• To print and check the current head position adjustment values, press the Setup button until 6 appears
on the LCD, and press the Black button or the Color button.
103