User Manual

1. Roll up paper in opposite direction to paper curl as shown below.

Check that paper is now flat.

We recommend printing curl-corrected paper one sheet at a time.

Note

•

Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.

Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.

This may improve the print result.

(B) Print side

We recommend feeding paper that has been curled outward one sheet at a time.

Check4

If intensity is set high, reduce intensity setting and try printing again. (Windows)

If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become

wavy, causing paper abrasion.

Check the intensity setting in the printer driver.

Adjusting Intensity

Check5

Is platen glass dirty?

Clean the platen glass.

Cleaning Platen and Document Cover

Check6

Is paper feed roller dirty?

Clean paper feed roller.

Cleaning Paper Feed Rollers

342