User Manual

Appears after performing network setup and clicking Set to close the window.

• Requires Setup

Indicates the printer is required to perform Wi-Fi setup.

Performing/Changing Wi-Fi Settings

• Not Set

Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or

enable IPv6 on Network Settings....

Performing/Changing Wi-Fi Settings

• IP Address Overlap

Indicates the IP address is duplicated to another printer.

• Unknown

Indicates the printer recognized as Available in the past cannot be used currently.

Note

• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.

D: IP Address

Displays the printer IP address. Nothing is displayed if the printer status is Requires Setup.

Note

• If USB is selected from the pulldown menu on the toolbar, "-" is displayed.

E: Location

Displays the printer location if it is registered. Nothing is displayed if the printer status is Requires

Setup.

Note

• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.

Assigning Printer Information

F: Connection Method

Displays printer connection method (wired LAN, Wi-Fi, or USB).

Note

• If USB is selected from the pulldown menu on the toolbar, USB is displayed.

• If the printer supports both of the LAN connection methods, the printer is recognized as two

printers and they are displayed separately. (The same numbers are displayed on Serial Number

(Last 5 Digits).)

• If the printer does not support wired LAN, wired LAN is not displayed.

• If you are using IJ Network Device Setup Utility on the computer which does not support Wi-Fi,

Wi-Fi is not displayed.

G: Setting Method

Displays printer setting method.

• Auto