User Manual

Using the Optional RC-V100 Remote Controller
118
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to the camera’s REMOTE A terminal in order to
control the camera (including advanced recording functions) from a distance. The remote controller lets you turn
the camera on, navigate the menus and remotely control the aperture and shutter speed, change picture-related
settings like the knee and sharpness, and more.
Using the optional EU-V1 or EU-V2 Expansion Units and RR-10 or RR-100 8-pin Remote Cable, you can also
connect the RC-V100 to the REMOTE B terminal on the expansion unit. When you use the REMOTE B terminal,
the camera can receive and process multiple simultaneous commands from the remote controller.
For details on how to connect and use the remote controller, refer to its instruction manual.
1 Turn off the camera and connect the optional RC-V100 Remote Controller to the camera.
• If necessary, use an optional expansion unit and 8-pin remote cable to connect the RC-V100.
2 Turn on the camera in CAMERA mode.
3Select > [
B System Setup] > [REMOTE Term.] > [RC-V100 (REMOTE A)] or [RC-V100
(REMOTE B)].
Options
[RC-V100 (REMOTE A)]:
Select this option to use the optional RC-V100 connected to the camera with the RC-V100’s
remote cable.
[RC-V100 (REMOTE B)]:
Select this option to use the RC-V100 connected to an expansion unit with an 8-pin remote
cable (all optionals).
[Standard]: Select this option to use commercially available remote controls.
NOTES
NOTES
• The AGC button, AUTO KNEE button and AF button on the remote controller will have no effect on the
camera.
• The AUTO IRIS button on the remote controller can operate the camera only when a compatible EF lens
(A 225) is attached to the camera.
• The ZOOM dial on the remote controller can operate the lens only when a compatible EF Cinema/broadcast
lens (A 225) is attached to the camera.
• The REMOTE A and REMOTE B terminals cannot be used at the same time.
Remote cable
(supplied with the RC-V100)
RR-10 or RR-100 8-pin Remote Cable (optional)
EU-V1 Expansion
Unit 1 (optional)