User Manual

Saving and Loading Menu Settings
130
Saving and Loading Menu Settings
After you adjust settings in the various menus, you can save those settings in the camera or on an SD card. You
can load those settings at a later date or on another C500 Mark II camera so that you can use that camera in the
same way.
Saving Menu Settings
1Select > [ B System Setup] > [Transfer Menu/ / ] > [Save].
2 Select [To Camera] or [To SD Card] and then select [OK].
• The camera’s menu settings will be saved to the selected destination. If menu settings were previously
saved, the old file will be overwritten by the current menu settings.
3 When the confirmation message appears, press SET.
Loading Menu Settings
1Select > [ B System Setup] > [Transfer Menu/ / ] > [Load].
2 Select [From Camera] or [From SD Card] and then select [OK].
• The camera’s menu settings will be replaced by the settings in the previously saved file. Then, the screen will
turn black momentarily and the camera will restart.
NOTES
• The following menu settings are not saved with this operation.
- > [
v Camera Setup] > [Color Bars]
- > [
Æ Recording/Media Setup] > [Metadata] > [User Memo]
- > [
¢ Monitoring Setup] > [User LUT 1] to [User LUT 4]
- > [
A Assistance Functions] > [Magnification], [Magn. Output], [False Color Index]
• The root certificate for secure FTP transfers is not saved.
• When menu settings are loaded with this operation, even protected custom picture files in the camera will be
replaced.
• Camera settings files are exclusively compatible for use only with C500 Mark II cameras.