User Manual

135
Playback
Clip Playback Controls
The following playback types are available using the joystick and onscreen joystick guide. You can press the
DISP button to show/hide the joystick guide.
1
You may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.
2
The speed indicated on the screen is approximate.
NOTES
• There is no audio during any of the playback types listed in the previous table.
• You can press the Ò button during fast playback to return to playback at normal speed.
Adjusting the Volume
You can use headphones or the built-in speaker to listen to the audio during
normal playback. When you connect headphones to the × (headphone)
terminal, the speaker will be muted. The audio signal will also be output from the
SDI OUT terminal, MON. terminal and HDMI OUT terminal.
1 Select > [ ¡ Audio Setup] > [Headphone Volume] or [Speaker
Volume].
2 Select the desired level.
NOTES
• For details on changing the audio channel, refer to Audio Output (A 151).
• If you set an assignable button to [Headphones +] or [Headphones –] (A 119), you can press the button to
adjust the headphone volume without using the menu.
Playback type Operation
Fast playback
1
During playback, push the joystick up or down.
Repeat to increase the playback speed to approximately 5x → 15x → 60x the normal speed
2
.
Frame advance/reverse During playback pause, push the joystick up or down.
Skip to the beginning of the next
clip
During playback, push the joystick right.
Skip to the beginning of the
current clip
During playback, push the joystick left.
Skip to the previous clip During playback, push the joystick left twice.
× (headphone)
terminal