User Manual

Clip/Photo Operations
138
NOTES
• A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.
Deleting $ Marks or % Marks
1 Select the desired clip in the [XF-AVC] index screen.
2 Press SET (clip menu) and select [Delete $ Mark] or [Delete % Mark] > [OK].
• The selected mark is deleted.
Adding Shot Marks
During the playback of a primary clip recorded in XF-AVC format, you can add shot marks (!) to particular
frames in the clip that you want to single out. To add a shot mark to a clip during playback or playback pause,
you must set an assignable button to [Add Shot Mark] in advance.
1 Set an assignable button to [Add Shot Mark] (A 119).
2 Select the desired clip in the [XF-AVC] index screen and press the Ò button.
3 During playback or playback pause, press the assignable button at the point in the clip where you
want to add the shot mark.
• [Shot Mark] will appear briefly and the shot mark will be added to the current frame of the clip.
• Adding a shot mark to a clip during playback will pause the playback.
Deleting All the Shot Marks from a Clip
1 Select the desired clip in the [XF-AVC] index screen.
2 Press SET (clip menu) and select [Del. All Shot Marks] > [OK].
• All shot marks in the selected clip are deleted.
Deleting Clips and Photos
You can delete clips and photos you are not interested in keeping, except for XF-AVC clips with an $ mark. To
delete such clips, delete the $ mark beforehand (A 138).
1 Select the desired clip or photo in the index screen.
2 Press SET (clip/photo menu) and select [Delete Clip] (clips) or [Delete] (photos) > [OK].
• The clip or photo is deleted.
• The operation cannot be canceled.
3 When the confirmation message appears, press SET.
IMPORTANT
• Be careful when deleting recordings. Once deleted, they cannot be recovered.