User Manual
Configuring Connection Settings
166
* Change these settings as explained in the wizard (A 156).
Deleting Communication Settings/Function Settings
1 Select > [ Network Settings] > [Advanced Settings] > [Communication Settings] or [Function
Settings].
2 Select the desired communication setting ([NW1] to [NW25]) or function setting ([MODE1] to [MODE25]).
3 Select [Delete Settings] > [OK].
• The communication setting/function setting will be deleted.
Configuring IPv6 Settings
1 Select > [ Network Settings] > [Advanced Settings] > [Communication Settings] >
Desired communication setting ([NW1] to [NW25]) > [Change Settings] > [TCP/IPv6].
• Select the communication setting of a network in which you want to use IPv6 settings.
2 Select [TCP/IPv6 Settings] > [Enable].
3 Select [Manual Setting] > [Enable].
• [DNS Server] changes to [Manual Setting] and you will be able to set the DNS server’s address, prefix length
and gateway address.
• If you are not using a DNS server, select [DNS Server] > [Disable].
4 Select [DNS Address], [Manual Address] (manually entered IPv6 address), [Prefix Length] (bits
available for the network address) and [Gateway] (gateway’s IP address) and enter the necessary
information.
• Enter the IP addresses and prefix length using the data entry screen (A 60).
Reading a Root Certificate for FTPS Transfer
When you select the [FTPS] transfer mode, you will need to read onto the camera the same root certificate saved
on the FTP server.
NOTES
• Only root certificates with the following file names can be read by the camera: “ROOT.CER”, “ROOT.CRT” and
“ROOT.PEM”.
[IP Streaming]
[Protocol]* [UDP], [RTP], [RTP+FEC], [RTSP+RTP]
[Destination Server]*,
[Dest. Port No.]*,
[FEC Port No.]*
[FEC Interval] 10 to 100 (intervals of 5)
[RTSP: User Name]*,
[RTSP: Password]*
[Video Output Conf.]* [9Mbps/1920x1080 59.94P], [4Mbps/1920x1080 59.94P], [9Mbps/1920x1080 50.00P],
[4Mbps/1920x1080 50.00P], [9Mbps/1920x1080 59.94i], [4Mbps/1920x1080 59.94i],
[9Mbps/1920x1080 50.00i], [4Mbps/1920x1080 50.00i],
[Audio Out Channels]* [CH1/CH2], [CH3/CH4]
Menu item Setting options and additional information