User Manual

183
Menu Options
[ ¢ Monitoring Setup] menu
[Headphone Volume] [Off], 1 to 15 (8) (A 135)
[Speaker Volume] [Off], 1 to 15 (8)
In MEDIA mode only, this setting is an alternative way to adjust the built-in speaker's volume (A 135).
[Monitor Channels] [CH1/CH2], [CH1/CH1], [CH2/CH2], [CH1+2/CH1+2], [CH3/CH4], [CH3/CH3], [CH4/CH4],
[CH3+4/CH3+4], [CH1+3/CH2+4]
(A 151)
[HDMI OUT Channels] [CH1/CH2], [CH3/CH4] (A 151)
Menu item Setting options and additional information
[LCD LM-V2 Brightness],
[LCD LM-V2 Contrast]
–99 to 99 (±0)
[LCD LM-V2 Color] –20 to 20 (±0)
[LCD LM-V2 Sharpness] 1 to 4 (2)
[LCD LM-V2 Luminance] [Normal], [+1], [+2]
[LCD LM-V2] settings are used to adjust, respectively, the brightness, contrast, color saturation,
sharpness and luminance of the supplied LCD monitor.
[EVF-V50 Brightness],
[EVF-V50 Contrast]
–99 to 99 (±0)
[EVF-V50 Color] –20 to 20 (±0)
[EVF-V50 Sharpness] 1 to 4 (2)
[EVF-V50 Luminance] [High], [Normal]
[EVF-V50 Eye Sensor] [On], [Off]
[EVF-V50] settings are used to adjust, respectively, the brightness, contrast, color saturation, sharpness,
luminance and eye sensor of an optional EVF-V50 OLED Electronic Viewfinder connected to the camera.
[EVF-V50 Eye Sensor]: When this setting is set to [On], the viewfinder will be turned off automatically
when the sensor does not detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in
playback mode).
[LCD LM-V1 Brightness],
[LCD LM-V1 Contrast]
–99 to 99 (±0)
[LCD LM-V1 Color] –20 to 20 (±0)
[LCD LM-V1 Sharpness] 1 to 4 (2)
[LCD LM-V1 Luminance] [Normal], [+1], [+2]
[LCD LM-V1] settings are used to adjust, respectively, the brightness, contrast, color saturation,
sharpness and luminance of an optional LM-V1 LCD monitor.
[EVF-V70 Brightness],
[EVF-V70 Contrast]
–99 to 99 (±0)
[EVF-V70 Color] –20 to 20 (±0)
[EVF-V70 Sharpness] 1 to 4 (2)
[EVF-V70 Luminance] [High], [Normal]
[EVF-V70 Eye Sensor] [On], [Off]
[EVF-V70] settings are used to adjust, respectively, the brightness, contrast, color saturation, sharpness,
luminance and eye sensor of an optional EVF-V70 OLED Electronic Viewfinder connected to the camera.
[EVF-V70 Eye Sensor]: When this setting is set to [On], the viewfinder will be dimmed automatically when
the sensor does not detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in playback
mode).
Menu item Setting options and additional information