User Manual

Menu Options
188
[ Assignable Buttons] menu
Following are the default settings for each assignable button. For a complete list of the functions that can be
assigned, refer to the detailed table (A 120).
[
B System Setup] menu
Menu item Setting options and additional information
[Camera] 1: [Magn.: VIDEO Term.], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All], 5: [LUT: All],
6: [ISO/Gain], 7: [Shutter], 8: [Slow & Fast Motion], 9: [Slow & Fast Frame Rate],
10: [White Balance], 11: [Set White Balance], 12: [FUNC], 13: [Audio Status],
14: [Push Auto Iris], 15: [One-Shot AF]
[Camera Grip] 1: [Focus Guide]
[LCD LM-V1/V2] 1: [FUNC], 2: [DISP]
[REMOTE A/B] 1: [Magn.: VIDEO Term.], 2: [Peaking: All], 3: [Zebra: All], 4: [WFM: All]
[Exp. Unit EU-V2] 1: [FUNC]
[EVF-V70] 1: [FUNC], 2: [EVF-V70 Setup], 3: [Magn.: VIDEO Term.], 4: [False Color: VIDEO Term.]
[Grip SG-1] 1: [One-Shot AF]
Menu item Setting options and additional information
[Reset] [All Settings], [Assignable Buttons]
These settings reset the following camera settings to default values/settings.
[All Settings]: All the camera’s settings except for the hour meter.
[Assignable Buttons]: Only the assignable buttons.
[Transfer Menu/ / ] (A 130)
[Save] [To Camera], [To SD Card]
[Load] [From Camera], [From SD Card]
[Time Zone] List of world time zones.
[UTC-05:00 New York] or [UTC+01:00 Central Europe]
1
(A 33)
[Date/Time] – (A 33)
[Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H]
1
[Language H ] [Deutsch], [English], [Español], [Français], [Italiano], [Polski], [Português],
[], [], [ ], [ ]
(A 33)
[REMOTE Term.] [RC-V100 (REMOTE A)], [RC-V100 (REMOTE B)]
2
, [Standard] (A 118)
[HDMI Max Res.] [4096x2160 / 3840x2160], [1920x1080], [1280x720] (A 144)
[Linked to HDMI Monitor] [On], [Off] (A 144)
[SDI OUT Output] [On], [Off] (A 143)
[MON. Output Resolution] [2048x1080 / 1920x1080], [1920x1080], [1280x720] (A 144)
[3G-SDI Mapping] [Level A], [Level B] (A 143, 144)
[MON./HDMI Scan Mode] [P], [PsF (Forced 1080i)] (A 145)
[G-LOCK/SYNC Term.]
2
[HD Sync Output], [Genlock Input] (A 97, 98)
[Genlock Adjustment]
2
–1023 to +1023 (000) (A 97)
The phase difference between the external Genlock signal and the camera is initially set to 0. This setting
allows you to adjust it within the range of approx. ±0.4 H (–1023 to 1023). To set a 4-digit adjustment
value, set the first field to 10 or –10.
[SYNC Scan Mode] [P], [PsF] (A 98)
[Time Code Mode] [Preset], [Regen.] (A 93)
[Time Code Run] [Rec Run], [Free Run] (A 93)
[Time Code DF/NDF] [DF], [NDF] (A 94)