User Manual

31
Preparing the Handle Unit and LCD Monitor
7 Connect the LCD monitor to the camera’s VIDEO
terminal using the supplied UN-5 Unit Cable.
•Align the
Í marks on the cable’s plugs and
terminals.
• If necessary, adjust the position of the cable so that it
does not get in the picture or obstruct the view.
NOTES
• Depending on the situation, the screws may become
loose. If necessary, use the supplied hex wrench for
0.64 cm, 1/4" screws to tighten them.
Adjusting the LCD Monitor
The LCD attachment unit’s various pivots allow you to rotate the position of the LCD monitor in a number of
ways to match your shooting style. The following are suggested positions, assuming the user is behind the
camera and can see the LCD monitor and the subject.







LCD monitor mounted on the cameraLCD monitor mounted on the handle unit