User Manual

Direct Setting Mode (FUNC Button)

In CAMERA mode, you can adjust main camera functions—shutter speed, ISO speed/gain, aperture and white

balance—using the FUNC button (direct setting mode). This section will explain the basic operation of the direct

setting mode. For specific details about the functions refer to the each function’s section: shutter speed (A 67),

ISO speed/gain (A 69), aperture (A 72), white balance (A 76).

Using the Direct Setting Mode

1 Press the FUNC button.

• The onscreen display of the selected function will be

highlighted in orange.

• Press the FUNC button repeatedly or push the joystick left/

right to select a different function.

2 Push the joystick up/down or turn the SELECT dial to

select the desired value or white balance mode.

• The selected value/mode will be set and direct setting mode

will end.

• The onscreen display of the selected function will return to

normal.

NOTES

• The camera will automatically end the direct setting mode in the following cases.

- If no operation was performed for more than 6 seconds.

- If the menu or a status screen was opened.