User Manual

Synchronizing with an External Device

• If the external Genlock signal is incorrect, the synchronization may not be stable. In such case, the recorded

time code may be incorrect.

Reference Video Signal Output

After changing the function of the optional EU-V1’s or EU-V2’s G-LOCK/SYNC OUT terminal, you can use the

camera’s video signal as a reference sync signal (tri-level HD signal) to synchronize an external device to this

camera. The reference signal’s configuration is determined by the video output configuration of the SDI OUT

terminal and other menu settings.

1Select > [B System Setup] > [G-LOCK/SYNC Term.] > [HD Sync Output].

2 If necessary, select > [B System Setup] > [SYNC Scan Mode] > [P] or [PsF].