Manual

3. Power Switch

4. FP Flash Switch

Set the power switch as

follows:

0 :To turn off the power.

1 :To turn on the power. If the

Speedlite is left unused for about

90 sec., it turns off automatically to

save battery power. To turn on the

Speedlite again, press the shutter

button or press the test firing

button.

Use this switch to set high

speed sync.

• : For normal sync,

: For high-speed sync.

When Speedlite 380EX is used with a Type-A camera and the switch Is set for high-speed

sync, using a shutter speed faster than the camera's maximum sync speed sets the high

speed sync mode and using a shutter speed slower than the maximum sync speed sets the

normal sync mode.

When a Type-B camera Is used, normal sync mode Is set regardless of this switch's setting.